Organic waste stops being your problem
Composting worms process manure, poultry litter, pomace and food waste on your own premises. Vermix PRO keeps up to 10 reactors under control: readings, protocols, storage and the economics of your vermifarm. The output is a high-quality organic fertilizer: vermicompost.
Different feedstocks, the same gaps in management
Waste becomes a growing cost
Hauling, storage, logistics. An expense that grows every month and returns nothing.
Environmental fees and regulatory risk
Environmental charges, fines for storage and discharge, inspections. You pay just for the waste sitting there.
Critical know-how rests on one person
The process depends on one technologist. When they leave, stability leaves with them, and a replacement is almost impossible to find.
The process is opaque and unstandardized
Decisions by eye, a different result every time, no way to repeat a success. No procedure, no history.
Your organic waste and what it becomes
Choose your industry. We’ll show the feedstock we work with, where its difficulty lies and what you end up with.
Your industry isn’t listed
Worms process most kinds of organic matter if the recipe is built for the feedstock. The app works out the substrate mix for your stream on its own, and an unusual case can be worked through with a Vermix technologist on the support plan.
From one person’s intuition to a managed system
Every gap in management gets a concrete answer in the language of production, not advertising.
Waste under control and on the books
Every batch is digitized and traceable, and the waste stream turns into vermicompost. An expense becomes an asset.
Transparency and compliance
A closed loop run to procedure instead of storage. Every batch’s history is ready for regulatory reporting.
Know-how in the system, not in someone’s head
Procedures, protocols and history live in the platform. The process survives staff changes and doesn’t depend on one specialist.
Standards and predictability
Shared protocols, measurable parameters and a repeatable result for every batch and every site.
Every decision is explainable and verifiable
Not “a black box issued a recommendation”. You can see what data a conclusion is based on, why it came out that way and whether the result was confirmed.
Facts from your readings
A conclusion is built on the actual numbers of your batch: the trend over recent days, not an industry average. You can see which readings shaped the assessment and when they were taken.
A biological cause, not a correlation
The model relies on known patterns of the process: the C:N ratio, oxygen levels, pH, core temperature. So an explanation can be checked and challenged, not taken on faith.
Checked against the result
After a protocol is carried out, the system asks for a follow-up reading and compares what was expected with what happened. If the result didn’t come, you see it at once, and the next step is chosen from the new data.
Everything works as one system
The operator’s readings go into the log, not into memory or a notebook.
VermiGuard finds a deviation before it turns into a loss.
The cause in the language of biology, and an action with its expected result.
The operator acts, and the system records the result in the log.
Every action is recorded: who, when and with what result. After a few cycles you have your own history of what worked with your feedstock and in your climate, and the process becomes repeatable.
What the PRO plan unlocks
The science is the same as on GO. PRO adds scale up to 10 reactors and records for the whole vermifarm.
In-depth readings
Temperature, moisture, pH, oxygen and salts (EC) by zone and depth of the reactor, not at a single point. A heat map shows where in the mass a problem is starting.
Sensor connection
If your site has sensors, readings go into the log on their own. Without them, the operator enters them by hand, which is quick and simple.
Feedstock fermentation
The app tracks feedstock batches in fermentation before they go into the reactor and tells you when they’re ready.
Roles and shift tasks
The director, technologist and operator each see their own view. The operator gets tasks for every reactor: what to do, how much and by when.
Storage
Feedstock, substrate and finished vermicompost on record: how much came in, how much is in process, how much is ready.
Vermifarm economics
Production cost, batch reports and data exports for regulators and meetings, without building spreadsheets by hand.
Three workspaces in one system
The operator enters readings, the technologist resolves deviations, the director sees the numbers. Each has their own workspace in one app.
The operator closes the shift with a checklist
The system hands out shift tasks for every reactor on its own, with no rounds with a notebook.
The shift task list builds itself: which reactor, what action, how much. The operator checks off completed work and enters readings from a smartphone right on site, with no paper and no retelling it all to the technologist at the end of the day.
The technologist works by exception
All reactors in one log, sorted by risk. Only the ones with parameters out of range need opening.
All reactors are brought into one log and sorted by risk. The technologist opens only those with parameters out of range; for the rest, the system stays quiet while all is well.
The director sees the numbers and batch history
Tonnage, closed batches and procedure compliance in one summary, without asking the technologist.
Tonnage, product yield, closed batches and procedure compliance in one site summary. No digging up data before a meeting or reconciling spreadsheets.
You won’t be left alone with your reactor
The app guides every step, the knowledge base answers common questions, and a Vermix technologist can be brought in for ongoing support.
Knowledge base and VermiAcademy
Problem breakdowns, protocols and lessons from a first reactor to an industrial site. All in one place.
Staff training
Operators learn from Academy lessons and tasks in the app. A new person starts a shift to the shared standard.
An assistant on call
VermixAI answers questions about your readings at any time and explains why it suggests that particular step.
Readings without rounds
Connect sensors and readings go into the log on their own. Without them, the operator enters them by hand, which is quick and simple.
Support from a Vermix technologist
A technologist remotely reviews your feedstock and any deviations a protocol doesn’t resolve, and answers your team. This is a separate paid service: write to us and we’ll discuss it individually, as the price depends on your volume and site requirements.
Try PRO on your own site
The first 14 days are free, no card needed. Set up your reactors, assign the director, technologist and operator roles, and work out the cost of your first batch.